Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 06/28/2010 in Posts

  1. 4 points
    What a "great idea" for Immunet users to voice their likes & dislikes Barbara! I completed the survey although, if chosen, I wouldn't be able to participate in the video conference since my computer has no web cam. "I would 'strongly urge any & all Immunet users' to complete this survey!" It really does only take a few minutes & that will give the devs much more insight into what Immunet users want in a new build. Best wishes, Ritchie...
  2. 3 points
    A couple of times this month I received a recorded phone call allegedly from an Amazon employee stating that they have detected possibly fraudulent activity with my account. I was then prompted to press 1 for more info. "I immediately knew this was a 'scam call' for the simple reason that I don't have an Amazon account!" After that I decided to do some investigation into this. "Amazon is aware of this scam and is advising it's customers if you do receive one of these scam calls don't fall for it, just hang up & 'definitely don't press any numbers' when prompted!" You can always check your Amazon on-line account yourself if you have any concerns and then contact Amazon customer service directly if you have questions. These Amazon scammers have also been using hacked email accounts. If you receive an email with similar content just delete it without clicking on any links or attachments included. You're also encouraged to report these calls or email to the Better Business Bureau, https://www.bbb.org/ and the Federal Trade Commission. https://reportfraud.ftc.gov/ Not a bad idea to also report this activity to your state's Attorneys General office. Regards, Ritchie...
  3. 3 points
    Hi Immunet Users, The development team working on Immunet (by Cisco) is looking for your feedback. Do you have 5 minutes to fill out a survey telling us more about how you use Immunet and how you think it could improve? Here is the link to the survey: https://www.ciscofeedback.vovici.com/se/6A5348A7201B0385 We know there is a lot of misinformation on the internet these days. If you would like to verify that this is real Cisco-sponsored research, email Barbara Shain, Cisco User Researcher, at bshain@cisco.com Thanks, Immunet UX
  4. 3 points
    I think this is an awesome thing!! I have filled out the survey and left my feedback. I really like that the platform is getting more support from cisco! As you said ritchie I would also encourage all users to fill out the survey, this will give us a chance to give feedback to the devs on how to improve the AV. The more of us that fill it out the better it will be. I can't wait to see how the survey helps and how it will help improve Immunet as a whole:) Stay safe everyone
  5. 3 points
    Hello all, We are happy to announce a new release of Immunet: Version 7.3.0! This latest version of Immunet provides the same great protection against malware and viruses as before but also includes some new features, enhancements and bug fixes as below. Changes in 7.3.0 New & Enhancements: New endpoint threat activity detection engine New Immunet UI cloud connect status message replacing cloud stats message Bug Fixes: Connector cloud registration issue fix related to long network interface names Fixed an issue related to support package Mitigating fixes related to no-reboot upgrade and uninstall failures Immunet Installer bug fixes Other bug fixes You can get the new installer from here https://download.immunet.com/binaries/immunet/bin/ImmunetSetup.exe Expected upgrade behaviour for Immunet users: Upgrades from Connector versions < 7.0.0 to 7.0.0+ require a reboot to complete Upgrades from Connector versions 7.0.0+ to any higher version do not require a reboot to complete Looking forward to your participation in using our new detection engine and some help in cases of upgrade reboot failures issues, if encountered any. We would appreciate it if you can reach out to us via support forum with Support logs as soon as you see upgrade failing or upgrade asking for a reboot on upgrade. If you are running an older version of Immunet, you should be able to upgrade via the 'Update Now' button in the UI. If you don't see the update in your UI we recommend uninstalling Immunet and reinstalling the version downloaded from http://www.immunet.com/index
  6. 3 points
    Hello all, We are happy to announce a new release of Immunet: Version 7.0.0! This latest version of Immunet provides the same great protection against malware and viruses as before, but also includes Credo and AMSI. Credo is a ML engine that allows endpoint connector to extract feature print of a PE file and send to the cloud to see whether the file is malware or not. ScriptID engine allows AMP connector to analyze scripts prior to execution. It is based on the Windows Antimalware Scan Interface (AMSI). In 7.0.0 version of connector only PowerShell scripts are analyzed. You can get the new installer here. https://download.immunet.com/binaries/immunet/bin/ImmunetSetup.exe If you are running an older version of Immunet, you should be able to upgrade via the 'Update Now' button in the UI. If you don't see the update in your UI we recommend uninstalling Immunet and reinstalling the version downloaded from http://www.immunet.com/index Changes in 7.0.0 Improvements and updates: New Credo engine New ScriptID engine for AMSI Query improvements in Immunet Protect driver Improvement in preforming Immunet registration Improvements in Connectivity test tool Curl version update ImmunetSCMS service now handle crash reporting Driver updates to support No Reboot upgrades New certificate for the ELAM driver Improvements on the Malicious Activity Protection (MAP) to reduce false positive Fixes: Stability Improvements in the Immunet Protect driver Stability Improvements in the SPP Stability Improvement on Immunet Protect shutdown Stability Improvements in the Exploit prevention
  7. 3 points
    Hello all, We are happy to announce a new release of Immunet: Version 6.3.0! This latest version of Immunet provides the same great protection against malware and viruses as before, but also includes Improved detection coverage Windows 10 RedStone 6 support Update ClamAV to version 0.101.2 Improved status in Windows Security Center Bug fix to exploit prevention engine Immunet installer now handles all legal windows characters that can be in a Windows file path for default install Fixes to mitigate high CPU/Memory issue some users are seeing on Windows 10 during Windows updates. As always, you can get the new installer at https://www.immunet.com. We strongly recommend existing Immunet user to upgrade to v6.3.0 and start taking advantage of new improvements. If you are running an older version of Immunet, you should be able to upgrade via the 'Update Now' button in the UI. If you don't see the update in your UI we recommend uninstalling Immunet and reinstalling the version downloaded from https://www.immunet.com If you do encounter problems with the new version of Immunet Protect, please let us know via forums at http://support.immunet.com Thank you for your continued support! The Immunet Protect Team
  8. 2 points
    Oh, and by the way, I forgot to mention Ritchie, it goes without saying that all the work you do on these forums is really appreciated. It must be pretty hard as it's probably quite a frustrating and thankless task, but the fact you haven't given up is an absolute godsend to the remaining loyal users! I try my best to help too, but you seem to have super-powers and have usually already solved someone's issue before I've even read their post!
  9. 2 points
    I am running Windows 7 Pro on an older desk top and during the last few days have been getting a Virus detected and quarantined message on virtually every application that I use. I have been using some of these sights for 10 plus years and never had this issue previously. It persists even when I switch from Firefox to Chrome. I just ran a full scan of the entire computer and get reports of no virus found and have verified that the latest update is installed (as of 2/2/19). When I go to manually initialize Immunet, I see a note that the computer has never been scanned and is not secure even when I have just run a full scan. A typical warning is that f_0001f3 has been detected as Clam.Txt.Trojan.Generic-6840302-0. Quarantine was successful. I even got a message that Firefox Installer was a Trojan. This is very annoying and I would like some suggestions to resolve this issue. Nelson
  10. 2 points
    Hmm, restore from quarantine seems fine now. I suspect this might just be related to system load. If the system is under stress when an attempt is made to restore from quarantine, it probably takes slightly too long for the GUI to communicate properly with the Immunet service, so the GUI assumes that the service isn't running, and/or the operation has failed. Intermittent error are the worst to diagnose and fix!
  11. 2 points
    Hello all We are happy to announce a new release of Immunet: Version 7.3.2! This latest version of Immunet provides the same great protection against malware and viruses as before, but also includes some new features, enhancements and bug fixes as below. Changes in 7.3.2 New: Exploit Prevention engine with Script Control support Bugfixes/Enhancements Improvements to endpoint threat activity detection engine Increased the number of process exclusions honoured by the Connector to 500. Improved stability of local UI notifications. Addressed an issue where System Process Protection exclusions would not work for processes that start before the Connector. Changed Connector driver altitudes to officially registered altitudes. Removed Connector-related events and logs from a computer when the Connector is uninstalled Addressed issues with file exclusions. General performance and stability improvements for Exploit Prevention engine Fix for the vulnerability described in CVE-2019-0708. Fixed Exploit Prevention engine compatibility issues with the following applications: APTA Connect MS PowerPoint 2016/2013 FSLogix Internet Explorer and different plugins CIG ACG MS Office Appv applications Visual Studio debugger Vizient and Open Text IRM Black Knight You can get the new installer from here https://download.immunet.com/binaries/immunet/bin/ImmunetSetup.exe Expected upgrade behaviour for Immunet users: * Upgrades from Connector versions < 7.0.0 to 7.0.0+ require a reboot to complete * Upgrades from Connector versions 7.0.0+ to any higher version do not require a reboot to complete If you are running an older version of Immunet, you should be able to upgrade via the 'Update Now' button in the UI. If you don't see the update in your UI we recommend uninstalling Immunet and reinstalling the version downloaded from http://www.immunet.com/index
  12. 2 points
    I thought of yet another Idea that some users might appreciate. Add a dedicated CMD Command-line scanner to Immunet. That would be something useful for power users & IT technicians. Cheers, Ritchie...
  13. 2 points
    I support that 99,999% Jasen Dear Immunet_UX, please read the forum! please support your forum moderator! please tell the support that you are welcome to reply to e-mails! The Form is fillet out with my informations but please ask to ritchie because ritchie knows all important things and is our hero. I don't have high hopes, because Windows 7 ...
  14. 2 points
    Done! It's nice to see this project getting the care it needs. I'm eager to see what it's coming from this!
  15. 2 points
    Oh yes Ritchie, you are doing an excellent job.
  16. 2 points
    You made a great Job here Ritchie, you help a lot this community. Perhaps cisco doesn't have someone managing support of immunet. It seems when they have a free time they visit here to see what is going on.
  17. 2 points
    Hey all, For a more "generic" way to start/stop Immunet, you can do the following (possibly only works in Windows 10, I haven't tried on earlier versions * ) : Stopping Immunet From the command line: wmic service where "name like 'Immunet%'" call stopservice or from a batch file: wmic service where "name like 'Immunet%%'" call stopservice (Re-)Starting Immunet From the command line: wmic service where "name like 'Immunet%'" call startservice or from a batch file: wmic service where "name like 'Immunet%%'" call startservice The advantage of these is you don't need to know what version of Immunet you're using, so you don't need to work out the new service name after upgrades or edit any scripts you have. I have a custom script that downloads some of the Securiteinfo, Sanesecurity and RFXN custom databases, stops Immunet, copies them to Immunet's "ClamAV" dir, and restarts Immunet. By identifying the "newest" ClamAV dir and using the more-generic way of stopping the service, my script doesn't need editing every time Immunet upgrades. For my case, this increases Immunet's static file detection rate from about ~75% to >95%. I originally worked this out a while ago because I did a couple of upgrades where the Immunet service changed name from something like "ImmunetProtect" to "Immunet 6.0.4" --- * I don't know much about Windows as I've been primarily a Unix/Solaris/GNU-Linux user for both work and play since the late 1990s. I only maintain a Windows installation for the tuning software that allows me to flash custom maps to my car's ECU.
  18. 2 points
    Hi 4tygrit i've the same update problem with the main.cvd file in a other post. To update immunet i've download ClamAV Portable (doant forget to get Updates in ClamAV). Stop the Immunet Service Delete in "C:\Program Files\Immunet\clamav\0.1......" the file main.cvd and daily.cvd copy the main.cld and daily.cvd files from "...\PortableApps\ClamWinPortable\Data\db" to "C:\Program Files\Immunet\clamav\0.1......" Start the Immunet Service again
  19. 2 points
    Hello all, We are happy to announce a new release of Immunet: Version 7.2.8! This latest version of Immunet provides the same great protection against malware and viruses as before but also includes some new features, enchantments and bug fixes as below. Changes in 7.2.8 New & Enhancements: Added support for the Windows 10 November 2019 Update (version 1909) Added support for Windows 10 20H1 (Version 2004) (RTM Preview build: 19041) Improved visibility and enhanced protection against script-based attacks System Process Protection Improvements Improved Malicious Activity Protection engine to no longer detect on Google Chrome Stability Improvements in the Exploit Prevention engine Installer improvements to handle NoReboot upgrades and uninstall Stability Improvements in the Immunet SelfProtect driver Bug Fixes: Resolved Windows Connector service freeze issue on startup, under certain circumstances Improved the Windows connector process of gathering BIOS serial number, when needed, to properly detect hardware changes for registration with AMP Cloud Fixed a crash that could be encountered on shutdown Addressed issue where Windows Connector would fail to upgrade when installed alongside BitDefender AV Made stability improvements in the Connector installer Fixed an issue where ClamAV was taking a long time in scanning PDF files resulting into longer high CPU usage Updated ClamAV to 0.102.1, including changes related to the vulnerability described in CVE-2019-15961 Fixed an Exploit Prevention engine issue that could cause Google Chrome v78 and later to crash or display a renderer code integrity error This version also addresses the following vulnerabilities: CVE-2019-1010305 CVE-2019-12625 CVE-2019-12900 You can get the new installer from here https://download.immunet.com/binaries/immunet/bin/ImmunetSetup.exe Expected upgrade behaviour for Immunet users: * Upgrades from Connector versions < 7.0.0 to 7.0.0+ require a reboot to complete * Upgrades from Connector versions 7.0.0+ to any higher version do not require a reboot to complete Looking forward to your participation and help in cases of upgrade reboot failures issues, if encountered any. We would appreciate it if you can reach out to us via support forum with Support logs as soon as you see upgrade failing or upgrade asking for a reboot on upgrade. If you are running an older version of Immunet, you should be able to upgrade via the 'Update Now' button in the UI. If you don't see the update in your UI we recommend uninstalling Immunet and reinstalling the version downloaded from http://www.immunet.com/index
  20. 2 points
    I'd like to report that the 7.2.8 upgrade through the UI took place with no problems. No reboot necessary! Great job on that guys! I did have to create a new allow rule with my firewall for sfc.exe but that's not uncommon behavior when a new build is installed. Some impressive changes have been made! A personal thanks to nirmeshptl for including a detailed change log with this announcement! Something I've been suggesting in the past when a new build is publicly rolled out. Best wishes, Ritchie...
  21. 2 points
    Interesting video you uploaded Valnat! Thanks for sharing. As the video demonstrates Immunet has some suburb efficacy! Much better than Microsoft's Defender AV! As you mentioned Immunet can be used as a stand-alone AV solution but it is recommended you use the ClamAV module if used in that manner. If Immunet is used as a companion AV to another compatible "paid product" it's best if the ClamAV module and updates for it remain disabled. This will reduce the amount of system resources being used. Also, don't forget to create exclusion rules for the Program Files folders for both AV's. This can go a long way in avoiding possible conflicts between the two AV's. Regards, Ritchie... P.S. I moved this topic to the General forum section since that's a better place for it.
  22. 2 points
    Hello Damokles and thank you for your interest in Immunet, Not sure what you mean by making a complete list. Immunet originally was strictly just a cloud based AV when it was first introduced. The draw back to that was Immunet had to have a constant internet connection for cloud based lookups during normal operation & during a scan. Also there was no off-line scanning capabilities. After the introduction of the open-sourced signature based ClamAV into the program that not only added an additional layer of off-line protection but also added the ability to run scans even if no internet connection is present as it works as a traditional downloaded malware definition signature based AV. You can use just the scalable multi-threaded ClamAV scripting code http://www.clamav.net/ as an automatic or on-demand AV scanner & a email gateway scanner for instance. ClamAV does not have a UI in the traditional sense since everything is handled through Command Line scripts. Of course Immunet provides a traditional UI to users without the need for advanced technical skills to configure or use since ClamAV's scripts are integrated into Immunet's program code via the ClamAV module. Immunet can be used as a "stand-alone" AV solution. If used in this manner it is recommended that the ClamAV module & updates for it be enabled. If Immunet is used as a companion AV to a compatible paid product it is recommended that the ClamAV module remain disabled. This improves the amount of system resources being used. Immunet will work with Defender. Using them both should provide good malware protection for the average user. In fact Immunet has, by default, an exclusion for Defender for improved compatibility. If using Immunet with Defender I would consider "not disabling" the ClamAV module for the reasons described below. Adding an exclusion/exception rule to Defender for Immunet's Program Files folder is also very highly recommended. That way they recognize each other as safe programs and goes a long way in avoiding possible future conflicts. If I "had to choose" one or the other I would definitely go with Immunet over Defender. Microsoft even admits that Defender is meant for users that don't have or don't want to use a different AV solution. Although some improvements have been made with newer builds Defender still is not a stellar anti-malware program as it provides basic protection. The Plus version of Immunet is no longer available. Immunet Protect Free is just like the name implies, it's totally free for individual/home or private network use and for "non-profit" charitable or educational organizations! Immunet is not licensed for any "for profit" business, service, organization or product. If it's found that Immunet is being used in such a manner no support will be offered. This information is included in the End User License Agreement (EULA) when first installing Immunet. We recommend that any for-profit entities use Immunet's paid Enterprise version called AMP for Endpoints. https://www.cisco.com/c/en/us/products/collateral/security/fireamp-endpoints/datasheet-c78-733181.html I hope this answers your questions. Regards, Ritchie...
  23. 2 points
    Hello all, We are happy to announce a new release of Immunet: Version 7.0.2! This latest version of Immunet provides the same great protection against malware and viruses as before, but also includes NoReboot upgrade beta. The Immunet Windows Connector often requires a reboot to complete the upgrade. This can be problematic for end users who have to time reboots, if they are in middle of critical updates or working on some important project, in order to upgrade the Connector, raising barriers to upgrading more regularly. This feature is to remove the requirement for reboots when upgrading the Windows Connector for good. Expected upgrade behaviour for Immunet users: * Upgrades from Connector versions < 7.0.0 to 7.0.0+ require a reboot to complete * Upgrades from Connector versions 7.0.0+ to any higher version do not require a reboot to complete Looking forward for your participation and help in cases of upgrade reboot failures issues, if encountered any. We would appreciate if you can reach out to us via support forum with Support logs as soon as you see upgrade failing or upgrade asking for reboot on upgrade. You can get the new installer here. https://download.immunet.com/binaries/immunet/bin/ImmunetSetup.exe If you are running an older version of Immunet, you should be able to upgrade via the 'Update Now' button in the UI. If you don't see the update in your UI we recommend uninstalling Immunet and reinstalling the version downloaded from http://www.immunet.com/index Changes in 7.0.2 Improvements and updates: No Reboot upgrades No Reboot uninstalls New kernel logs for Connector upgrades and uninstalls Installer improvements to handle NoReboot upgrades and uninstall Fixes: Stability Improvements in the Immunet SelfProtect driver Fixed reference leak in asynchronous kernel exclusions Stability Improvements on Immunet Protect driver
  24. 2 points
    Hi all, The newest 6.3.0.10988 build of Immunet has a new running process called cscm. Microsoft made some improvements as to how antivirus solutions can better protect their software from unauthorized intrusion. It's a fact that some malware has the capacity to disable the installed AV, usually through unauthorized code-injection methods. This added security protocol will make it much harder for malware to disable Immunet. For anyone that wants to read this Windows Dev Center article (thanks Wookiee) regarding this added security protocol click on this link. https://docs.microsoft.com/en-us/windows/desktop/services/protecting-anti-malware-services- Regards, Ritchie...
  25. 2 points
    Yup, this is the right place for your questions. Sorry, Immunet doesn't offer spam or phishing protection, Interestingly , older versions of Immunet could scan local Outlook.pst email databases for malicious email attachments, but we shelved this feature for a couple reasons: 1) the average user moved to cloud email services (gmail, Hotmail, outlook.com / etc), most of which provide absolutely minimal span and phishing protection, making local emal scanning redundant 2) Microsoft changed their outlook.pst format and libraries a couple times resulting in Immunet failing to quarantine just the attachment from within the outlook.pst database file; and instead quarantined the entire email database.
  26. 2 points
    Ritchie, As soon and you mentioned AMP I fully remembered that I selected YES on both of those systems. I uninstalled Immunet and selected NO, rebooted and all is good now!! I agree that I will stay with AMP, but this is a GREAT free product for home users. Grant
  27. 2 points
    I've sent it to Clam so guess we'll see what they say. Thanks for your help!
  28. 2 points
    I would venture to guess that the ClamAV module is scanning files at the same time as they're being created by Visual Studio. Try creating a custom Immunet Exclusion rule for Visual Studio's entire Program Files folder in Settings. Then turn ClamAV back on, restart your computer and see if the same behavior persists. You can also directly contact the ClamAV developers to inform them of this issue if you wish. https://www.clamav.net/contact Best wishes, Ritchie...
  29. 2 points
    First of all for those that do not know what a VPN is here is a brief explanation of what it does. A VPN, or Virtual Private Network, allows you to create a secure connection using encryption protocols to another network over the Internet. VPNs can be used to access region-restricted websites, shield your browsing activity from hackers on public Wi-Fi, and much more. These days VPNs are "really" popular, but not for the reasons they were originally created. They originally were just a way to connect business networks together using encryption protocols over the internet or allow you to securely access a business network from home. VPNs essentially forward all your network traffic to an encrypted network, which is where the benefits, like accessing local network resources remotely and bypassing Internet censorship, come from. Why would I need a VPN service? Thanks to the Trump administration Congress passed legislation in Dec. of 2017 that allows your Internet Service Provider (ISP) to share or sell your browser history to third-party entities. Also, a VPN makes on-line shopping, banking or any site where sensitive data is required to be submitted much more secure since all internet activity is encrypted within the VPN service. I know that including a VPN service would be a costly endeavor since new code would have to be written and infrastructure changes would have to be enacted. For this reason I propose that a new Plus (paid) version be created to include an encrypted, entirely secure VPN service. Just an idea. Cheers, Ritchie...
  30. 2 points
    Try a restart of your PC and also press several times the update button!
  31. 2 points
    confirmed, is defiantly a Clam false positive. Thanks to everyone who reported this. we're reprod it internally and are working on a fix. In the mean time, if you turn off the clam AV engine in Immunet's settings that'll prevent the constant FP notifications and still keep your computer protected with the immunet cloud engine. We'll notify the thread to turn clam back on as soon as the fp is fixed.
  32. 2 points
    Why not brother.. You can download Avast offline installer from here and Know how to uninstall avast step by step here.. The step by step guide also has a link to the avast removal tool
  33. 2 points
    Hello everyone, I see a lot of future in this software, its interface is destined to "the end", compared to other interfaces today ... But instead of just talking, I made a new design for Immunet AntiVirus .. .I only did the basic part, in case I get you back, I can go back to work on the interface and finish for a new look to the software. Here are the images: I look forward to the feedback from the developers, and also from the community. Att: Lucas Lks
  34. 1 point
    ok this is what I did, Ran full scan with Immunet (I only have immunet but I made ClamAV was on). I don't have defender because my understanding is that you have to delete Immunet to install defender to run it (not sure the exactly way to do that correctly, so will hold off on doing that for now and will wait for response from you all). Run full scan on Immunet flag 74. 72 were like the first one the 2 like the 2nd one. I restore one of the files like the 1st one and drop it into www.virustotal.com. and only ClamAV detected it out of 60 other engines (please see pic) . What do you folks think do we have a false positive??? Also some of the Adobe files were listed from months ago. I am pretty sure I ran Immunet full scan more often then that. I am pretty sure I rant Immunet full scan last week if not the week before. any help will be appreciated. The other questions is in immunet if a file is quarantine it disappears form the file-path tree so for me I can not drop the file in virustotal.com unless I restore the file. Is there a way I can drop the file in virustotal when it is in quaranitine from immunet??? ps I use firefox and I have window 10. thanks
  35. 1 point
    Hi, I just have some free time to play with UI concepts - so I came up with these artistic prototypes. What do You Guys think? Any thoughts? My goal was to keep current functionality -> development, not a revolution. Regards, Marcin Full View: https://imgur.com/a/im7fywl
  36. 1 point
    Here's something else you could try. Immunet developers have rolled-out a new 7.3.12 build that has some bug fixes & improvements. You should get the update pushed to you through the UI or you can directly download the newest boot-strapper installer here. https://download.immunet.com/binaries/immunet/bin/ImmunetSetup.exe It wouldn't hurt to do an uninstall & reinstall actually considering the circumstances. It's up to you. If you do decide to do a uninstall & reinstall with the new build I would recommend you keep your previous Settings & Exclusions by clicking on the "YES" option when the uninstaller prompt asks if you plan to re-install Immunet. That way you won't have to re-configure your Settings and add your Exclusions over again as Immunet will save your history.dat files.
  37. 1 point
    I am guessing you didn't read my post? I said that the link https://www.immunet.com/false_positive shows an error when posting it, from what I have heard it has been broken for months now. Guess the Devs can't keep up with all the bugs, not sure how many there are working on Immunet?
  38. 1 point
    Wow, that's strange! I've just reinstalled Immunet (I had uninstalled it, selecting "no", so that all data and settings would be deleted). The first thing it did was update the ClamAV databases successfully! I hope this was just a temporary glitch. Fingers crossed it's now fixed...
  39. 1 point
    I'm sorry, but I find the survey very disturbing. I cannot get the Immunet 7 service to stay running and development wants to ask how I feel about the importance of "history" and if I like the idea of moving history to the Windows Event Viewer. Are they serious? The location of "history" is the biggest thing they are worried about? How about they fix what they have before they rip away or add new features? How about leaning on your support forum for actual customer feedback? BTW, Windows Event Viewer interface is old and outdated. Why Microsoft has not changed the MMC interface is beyond me. I have to resort to LDAP queries and other scripts to properly search/filter event viewer at work and now Immunet wants to know if I'm ok with that on my home computer? No thank you. I would rather see some Cisco AMP for Endpoint features making their way into Immunet. I would like to know what my family members were doing on a computer when an incident occurs. AMP makes this very nice. This is a step forward. Windows Event Viewer is a step backwards. If Cisco is not willing to resolve the issues with Immunet and properly support the consumer base, then pull the plug and let it die. I really hope Immunet development continues and improves. Jasen
  40. 1 point
    Hi, Could you please read the Private Message I sent you? Cheers, Ritchie...
  41. 1 point
    I'd like to wish everyone a safe & happy July 4th weekend! I know that many cities & municipalities across the country have canceled their fireworks display because of the pandemic. If you're lucky enough to live in or near a location that will have a display just remember to follow the CDC's guidelines. If you go out wear a face mask & continue to practice social distancing! Some health experts are worried that if people congregate in large crowds (like what happened Memorial Day) it could cause another spike in covid-19 cases. Cheers, Ritchie...
  42. 1 point
    Hello Diego, Immunet protection improved a lot with the lastest updates. You can use it alone or with another antivirus if you wish. For a normal user Immunet can offer proper protection by itself. This is a video from a test some guy made using Immunet.
  43. 1 point
    Ritchie I went and loaded Firefox on another drive so the warning would come up. I'll just uninstall it. I couldn't find it once I went past it on other drive with Firefox. If I'm getting it so are others. My clock is correct.
  44. 1 point
    Sorry to hear you had a bad experience with Immunet. Did you create an exclusion rule for Malwarebytes entire Program Files folder with Immunet & create a exclusion rule for Immunet with MB? That can go a long way in avoiding possible conflicts when running Immunet as a companion AV to another product. Like you mentioned, it could also be that your older computer just doesn't have the system resources needed. Especially if it's older SDRAM or DDR memory modules 3 gigs of RAM really isn't that much memory these days as software increasingly becomes more complex requiring more RAM & CPU cycles. I seen this happen to a friend of mine a number of years back. He was using an older rig with Win XP installed. After upgrading to a newer version of Immunet at that time he discovered that his old computer would just shut down after boot-up because "all available SDRAM memory was being used up!" I had to help him uninstall Immunet by using Safe Mode. Immunet no longer supports Windows XP since version 5 was first rolled out. I'm sure you're also aware that Microsoft no longer supports Windows 7 with security updates, bug fixes and system upgrades. That means as time goes by your computer will become more vulnerable to malware, viruses and hackers. Maybe it is time to consider getting a newer rig briab. Regards, Ritchie...
  45. 1 point
    Well this morning it decided to work. The last scan button was yellow (for not doing a scan within 24 hours?) so I did a flash scan.After that was complete I tried to schedule a scan again and it let me.
  46. 1 point
    Two days ago my Windows 10 got a serious update (took about 3 hours). Since that time I've been getting that 503 error. Coincidence?
  47. 1 point
    There is another option of using the Verbose Tray Notifications setting. Ordinarily this feature is best left off but perhaps you may find it useful. Click on the Notification Settings tab in Settings and turn "on" Verbose Tray Notifications, don't forget to click Apply too.. You will start getting alerts for every file Immunet encounters this way. Be forewarned, there will be many of them.
  48. 1 point
    Initially, my Immunet had the auto quarantine option activated and it quarantined a lot of my executables from program files folder including IDMan.exe and some others like the vipsocks executable. I have no complaints against that - ClamAV's security features might be too good. What bugged me though is the quarantine's UI design. Some of the executables, detected from the "Appdata/Roaming" folders were leftovers from installations and I wanted to batch delete them. Alas, I couldn't do it. Also, there wasn't any option to add an exclusion as well for a particular file in quarantine itself while restoring a false positive. Same goes for deletion - I couldn't use my keyboard to multi - delete files. And its a pain to select 10 files by clicking on each of them and deleting them one by one. Workaround - Its true that the Immunet folder C:\Program Files\Immunet\Quarantine contains the quarantined files, but at least the GUI should prompt to open that folder so that one can batch delete at least if not batch restore.
  49. 1 point
    I think what Kirav is talking about is the Metro theme configuration you can use with Win 8 & 8.1. To make the UI look similar to this I would conjecture. I have to agree with Kirav, it really has been a while since the UI got updated to "something" newer/different looking. Folks keep pointing that fact out!
  50. 1 point
    A lot of users have a third part firewall running which is a great idea but sometime some problems between the firewall and Immunet happens. Most software based firewalls will automatically ask if you want to allow Immunet passing through but a few dont. The few software based firewalls and most hardware based firewalls who dont allow Immunet to run probably need to be configured to allow Immunet to communicate with the cloud. To allow connection to the internet you need to allow or open a few ports that are being used by Immunet. The port number used for cloud communication are: 80 - TCP (HTTP) 443 - TCP (HTTPS) 32137 - TCP. 53 - UDP is needed for DNS lookup. So keep those ports open for Immunet in software and hardware based firewalls. (Hardware based firewalls are often built-in in routers and modems).
×
×
  • Create New...