Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by Frank_

  1. Its a never ending story... again and again. Immunet was unable to update the database because the clamav engine was outdated. Immunet it try again and again... I reinstalled Immunet, try it again and immunet report me that Database is up to date. But there was only the daily databasefile in the folder, main database file is missed. I try the update again, same result. Up to date. I tryed to update my portable ClamAV with newest clam engine and i get this. Update ClamAV Databases... ClamAV update process started at Tue Jul 20 13:43:28 2021 WARNING: FreshClam previously received error code 429 from the ClamAV Content Delivery Network (CDN). This means that you have been rate limited by the CDN. 1. Run FreshClam no more than once an hour to check for updates. FreshClam should check DNS first to see if an update is needed. 2. If you have more than 10 hosts on your network attempting to download, it is recommended that you set up a private mirror on your network using cvdupdate (https://pypi.org/project/cvdupdate/) to save bandwidth on the CDN and your own network. 3. Please do not open a ticket asking for an exemption from the rate limit, it will not be granted. WARNING: You are still on cool-down until after: 2021-07-21 13:23:22 Thank you very much, really good job. Apparently you caused so much traffic that ClamAV had to take these measures. The bad thing is that I do not receive any information from Immunet if an update does not work. If you don't check every couple of days to see if everything is working, you’re kidding. Please, please bury this project.
  2. Dr. Franken...: What a filthy job. Igor: Could be worse. Dr. Franken...: How? Igor: Could be raining.
  3. Don't forget to delete the files lastupd and update.log (a lastupd file can make trouble). During tests, I always rename the cvd files to see if fresh cvd's are being downloaded. FrankenImmunet, sounds good. FrankenImmunet with IgorCloud.
  4. Did you overwrite the old files in the folder %programfiles%\Immunet\clamav\[version] ??? Immunet use the old engine if you create a new folder with the new version of the engine in %programfiles%\Immunet\clamav\. This folder is set in the configuration files of Immunet and you cant edit this cofiguration file about protection functions of Immunet. (If you edit the file, Immunet cant start and stop protection od the system) So you have to stop the Immunet service and overwrite the old files i. e. in ...\Immunet\clamav\ Start the Immunet service and try again the update 2-3 times. This is not a Problem or Bug. ClamAV doesent Update the CVD Files if Engine is outdated. This is not a bug, it is a security feature. The update Button in Immunet only check for a Update of Immunet it self and runs freshclam.exe (from ClamAV) to update the CVD files. Thats all. So if the Engine is outdated freshclam.exe cancel the update. You can check this also if you run freshclam.exe in CMD.
  5. Immunet 7.3.2, what a disappointment! ClamAV Engine is out of date! How often do I have to repeat this in this forum? Installed ClamAV Engine is Current ClamAv Engine is clamav-0.103.0 Download: https://www.clamav.net/downloads#otherversions https://www.clamav.net/downloads/production/clamav-0.103.0-win-x64-portable.zip https://www.clamav.net/downloads/production/clamav-0.103.0-win-x64-portable.zip.sig Update does not work, the updater downloads the daily.cvd but is unable to apply the update. Shame!!! Read this: https://support.immunet.com/topic/7500-not-updated/ After the manual update of the CLAMAV engine I get the message after pressing Update that Immunet is up to date. However, there is no current CVD file. The update of the CVD files only starts when you press Update button again. Now, thanks to the new engine, successful. You are really bunglers, if one may say that. Really! Edit: The problem could be solved by integrating the update of the CLAMAV engine into the updater and executing it before the update of the CVD files. For this "idea" I would now like to be rewarded with $ 25 from Cisco. Edit Part 2: I also miss in the options "Monitor Network Connections" is this function removed or always ON now??? Immunet UI: The UI is very outdated, just right for a 14 "monitor with a resolution of 800x600, but with today's screens, over 40 you need a microscope . Thank You lastupd update.log
  6. If I should find out that there is a new version, I will surely take a look. Linux is complicated and the energy-saving functions are poorly implemented and don't appeal to me (as well as some other things). The update function of Windows 10 where I can no longer decide what to install and especially when, is an absolute NO GO. The only alternative would be to install the updates manually, but who wants that. So nothing will change on my Windows 7 in the near future and I think Immunet will probably no longer support 7 in the next release. Microsoft's policy bringings me one step closer to giving up computers and I've been thinking about buying an old mechanical typewriter for a long time. I hear people screaming again. "You are making the network insecure with your outdated Windows 7" "Your antivirus software hasn't been updated in a year? wtf" What can I say? ... #!@?, and I also use Android 2 and 4 on my smartphones. I also only updated my computers from XP to Windows 7 3 years ago. I also don't use a Corona app (bacause i dont drink), it only works with those who move with the times and waste resources. I don't carry this device around with me either, I don't need it, rather I'm forced to use this device if I want to use car sharing, for example. I'm all fed up with it. "S" & hit on it. If someone doesn't go along with that, he becomes an outsider and he is told he has to move with the times. In the history, too, people moved with the times and at a certain point it became a compulsion and it cost millions their lives. Yes, the comparison is a bit of a risk and a little inappropriateness, but I think in the future they will say, "Why did they do that". I don't want to discuss it either, it is not easy to go this way when you see the consequences of all steps and with each step it becomes more difficult to find solid ground in a withering world the closer you get to the "goal". I wish all readers a good day and stay healthy.
  7. By the way, I only took notice of this survey because Richtie wrote something elsewhere and then I stumbled across it by accident.
  8. I don't know what the bootstrapper is currently doing. Because I directly download the version that is shown to me via the update URL. Currently it would be but I don't feel like it ... never touch a running system ... Yes, it became quiet. EDIT: last post at Immunet Twitter page 22. Juli 2019 LOL That happens when a provider don't look into his forum for over a year, ignore customer emails and focus on apparently more important things. I think the current survey won't bring anything anymore, it comes at least 8 months too late and I assume that the plug will be pulled. Because nobody uses free software that doesn't work. Support for Windows 7 will definitely disappear. In this respect, it is of no interest to me to deal with it anyway. Immunet is so out of focus that print and online media are not interested in whether Immunet exists or whether it works or what is good. You can also see this in the fact that it is not tested in any AV Software test that I know of. In that sense, maybe see you. Maybe I'll stop by again in 5 months
  9. I support that 99,999% Jasen Dear Immunet_UX, please read the forum! please support your forum moderator! please tell the support that you are welcome to reply to e-mails! The Form is fillet out with my informations but please ask to ritchie because ritchie knows all important things and is our hero. I don't have high hopes, because Windows 7 ...
  10. Hi ritchie, very unfortunate to hear this. I'm still using version 7.02. I assume that the support has no idea about this problem or is ignoring it. At the moment I would be very happy if a well-known computer magazine would test and disembowel Immunet. So my hopes are rather low that a new release will work better. I don't even know which version is up-to-date because I haven't looked for an update for A long time ago... ... ... it has become quieter here ... it is probably because many are now using something different.
  11. Oh yes Ritchie, you are doing an excellent job.
  12. Are you getting paid for this job? I've been reading from your comments for some time that it frustrates you. If you don't get paid, you would quit as a moderator before it affects your health. Otherwise, it may be time to think about further training to expand your professional future. Have a nice day Frank
  13. It was not called PRO but PLUS and has not existed for years. https://web.archive.org/web/20150629232617/http://www.immunet.com/plus/a/index.html The last Immunet 7.3.0 (02.07.2030) has the same update problems on my computers and is still not using the current ClamAV engine. It is sad. Immunet was a beautiful and slim antivirus product without the ballast that other manufacturers use. If Cisco continues like this, then it would be better to end this project immediately. EOL
  14. Immunet Update does not work ClamAV is outdated Monitor Network Connections is removed from options Quarantine Behavior is removed from options No popup informations about virus detection, new updates, failed updates... i've also sent the update issue to Cisco support Two Weeks Later... no thank you, no reactions, no informations With Immunet 7.0.2 you had a really useful one and resource-saving antivirus software provided free of charge. In my opinion, the update to version 7.2.8 has made this product unusable and is now much more of a security problem. I have never seen anything like it in 30 years. Share the source code with the community, bury this project in your archives or whatever. I know it's free but it doesn't matter. Wikipedia told me how much profit you made, you also need something to make losses. I hope you do not use Immunet for this... https://blog.talosintelligence.com/2019/07/lets-destroy-democracy.html
  15. Thanks zombunny2 for your info to stop the service, i 've changed this in the scrips. It works also on W7. URL'S to check if a new version of Immunet is available. Only works if the entry is removed from the HOSTS file (update.immunet.com ). http://update.immunet.com/updates/protect/update-7.0.2-64.xml http://update.immunet.com/updates/protect/update-7.2.8-64.xml
  16. Yes, we're back to the old CPU cooling issue. The enemy of the CPU is temperature fluctuations. Cold, warm, hot ... up and down ... optimal cooling, which keeps the temperature constant at a certain value, would be the most pleasing to the CPU.
  17. I tryed Bitdefender Free, AVG Free, Panda Free, Kaspersky Free, Adaware Free, Avast Free and Sophos Free. Avast looks for me as the best, most protection of all and you can choose what modules (eMail, Web, ...) you install. Not a lot of advertising / propaganda (at the moment) The CPU Usage is low and RAM,... Ok.. all Programs need RAM but is ok. If you want to exclude some file types you have to add this exclusion in this way ?:\*.txt Don't forget to remove the check mark from Chrome when starting the setup. I have not installed the following modules; Web & Mail Shield, Software Updater (i use to many very old Apps), Browser Cleanup, WiFi inspector, ... Browser Extensions, Passwords and cleanup. Also i have installed Immunet 7.02 with Network Monitoring, ETHOS and SPERO enabled, Programm start/Install, Blocking mode and ClamAV Engine is disabled. The Folder "C:\Program Files\Immunet" i also exluded in Avast.
  18. Ok, a manual scan goes to 100% cpu usage but my temperature goes not higher as with a stress test.
  19. I try some other Free AV, no one makes me happy. I do a Rollback to Immunet version 7.02 Download Immunet 7.02: https://sourcefire-apps.s3.amazonaws.com/fireAMP/windows/ Download ClamAV X64 Portable: https://www.clamav.net/downloads#otherversions Edit host file C:\Windows\System32\drivers\etc\hosts and add this line to stop download of updates: update.immunet.com # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # rhino.acme.com # source server # x.acme.com # x client host # localhost name resolution is handled within DNS itself. # localhost # ::1 localhost update.immunet.com EDIT: If you do this you cant do a manual check for updates also. Check for new updates on a other computer with below url. http://update.immunet.com/updates/protect/update-7.0.2-64.xml Uninstall Immunet 7.2.8 with deleting of all files Restart the System Install Immunet 7.02 Stop the service of Immunet: net stop ImmunetProtect_7.0.2 Unzip clamav-0.102.3-win-x64-portable.zip and copy or move all files to "C:\Program Files\Immunet\clamav\" Start the service of Immunet: net start ImmunetProtect_7.0.2 Run this Script to Update ClamAV Database files UpdateClamAVDB.CMD @ECHO OFF :CHECK_ADMIN_RIGHTS ECHO Administrative rights needed. Check authorization... NET SESSION >NUL 2>&1 IF %ERRORLEVEL% EQU 0 ( ECHO Successful: Administrative authorization available. GOTO :ADMIN_OK ) ELSE ( ECHO Error: Administrative permission denied. ECHO. ECHO PAUSE EXIT ) :ADMIN_OK SET CLAM_PATH=C:\Program Files\Immunet\clamav\ ::net stop ImmunetProtect_7.0.2 wmic service where "name like "Immunet%%"" call stopservice TIMEOUT /T 3 ECHO Update ClamAV Databases... "%CLAM_PATH%\freshclam.exe" --datadir="%CLAM_PATH%" ::net start ImmunetProtect_7.0.2 wmic service where "name like "Immunet%%"" call startservice Place it in Autostart and Task Scheduler (run evry 2 hours) to get updates without userinput. Do this rollback only if you know what are you doing. Check Immunet site for a new version weekly and test if it works. Delete then the enrty in hosts to enable the Update feature in Immunet again and restart the system. EDIT: Alternative Script with Admin rights @echo off :: Run this script with elevation call :RequestAdminElevation "%~dpfs0" %* || goto:eof SET CLAM_PATH=C:\Program Files\Immunet\clamav\ ::net stop ImmunetProtect_7.0.2 wmic service where "name like "Immunet%%"" call stopservice TIMEOUT /T 3 ECHO Update ClamAV Databases... "%CLAM_PATH%\freshclam.exe" --datadir="%CLAM_PATH%" ::net start ImmunetProtect_7.0.2 wmic service where "name like "Immunet%%"" call startservice goto:eof ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :RequestAdminElevation FilePath %* || goto:eof :: :: By: Cyberponk, v1.5 - 10/06/2016 - Changed the admin rights test method from cacls to fltmc :: v1.4 - 17/05/2016 - Added instructions for arguments with ! char :: v1.3 - 01/08/2015 - Fixed not returning to original folder after elevation successful :: v1.2 - 30/07/2015 - Added error message when running from mapped drive :: v1.1 - 01/06/2015 :: :: Func: opens an admin elevation prompt. If elevated, runs everything after the function call, with elevated rights. :: Returns: -1 if elevation was requested :: 0 if elevation was successful :: 1 if an error occured :: :: USAGE: :: If function is copied to a batch file: :: call :RequestAdminElevation "%~dpf0" %* || goto:eof :: :: If called as an external library (from a separate batch file): :: set "_DeleteOnExit=0" on Options :: (call :RequestAdminElevation "%~dpf0" %* || goto:eof) && CD /D %CD% :: :: If called from inside another CALL, you must set "_ThisFile=%~dpf0" at the beginning of the file :: call :RequestAdminElevation "%_ThisFile%" %* || goto:eof :: :: If you need to use the ! char in the arguments, the calling must be done like this, and afterwards you must use %args% to get the correct arguments: :: set "args=%* " :: call :RequestAdminElevation ..... use one of the above but replace the %* with %args:!={a)% :: set "args=%args:{a)=!%" ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: setlocal ENABLEDELAYEDEXPANSION & set "_FilePath=%~1" if NOT EXIST "!_FilePath!" (echo/Read RequestAdminElevation usage information) :: UAC.ShellExecute only works with 8.3 filename, so use %~s1 set "_FN=_%~ns1" & echo/%TEMP%| findstr /C:"(" >nul && (echo/ERROR: %%TEMP%% path can not contain parenthesis &pause &endlocal &fc;: 2>nul & goto:eof) :: Remove parenthesis from the temp filename set _FN=%_FN:(=% set _vbspath="%temp:~%\%_FN:)=%.vbs" & set "_batpath=%temp:~%\%_FN:)=%.bat" :: Test if we gave admin rights fltmc >nul 2>&1 || goto :_getElevation :: Elevation successful (if exist %_vbspath% ( del %_vbspath% )) & (if exist %_batpath% ( del %_batpath% )) :: Set ERRORLEVEL 0, set original folder and exit endlocal & CD /D "%~dp1" & ver >nul & goto:eof :_getElevation echo/Requesting elevation... :: Try to create %_vbspath% file. If failed, exit with ERRORLEVEL 1 echo/Set UAC = CreateObject^("Shell.Application"^) > %_vbspath% || (echo/&echo/Unable to create %_vbspath% & endlocal &md; 2>nul &goto:eof) echo/UAC.ShellExecute "%_batpath%", "", "", "runas", 1 >> %_vbspath% & echo/wscript.Quit(1)>> %_vbspath% :: Try to create %_batpath% file. If failed, exit with ERRORLEVEL 1 echo/@%* > "%_batpath%" || (echo/&echo/Unable to create %_batpath% & endlocal &md; 2>nul &goto:eof) echo/@if %%errorlevel%%==9009 (echo/^&echo/Admin user could not read the batch file. If running from a mapped drive or UNC path, check if Admin user can read it.)^&echo/^& @if %%errorlevel%% NEQ 0 pause >> "%_batpath%" :: Run %_vbspath%, that calls %_batpath%, that calls the original file %_vbspath% && (echo/&echo/Failed to run VBscript %_vbspath% &endlocal &md; 2>nul & goto:eof) :: Vbscript has been run, exit with ERRORLEVEL -1 echo/&echo/Elevation was requested on a new CMD window &endlocal &fc;: 2>nul & goto:eof ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: All works fine now for me Edit: If Immunet realy can Update the ClamAV Database files; i dont know. In one test i get the DB files with the internal updater. It looks like ClamAv is only updated with a program update from Immunet. But I'm not certain.
  20. If you have a temperature problem with 100% CPU load, then it is time to clean the fan and apply new thermal grease. Panda: Day 2, i feel not good with this, I click uninstall .
  21. Yes, i've the same Problem. Windows 7. I dont want to go to 10. And Linux... not my Favorit. I think about living without a computer... but i want also to play my games.
  22. Sorry to disappoint you, but there is no alternative to Immunet. If the ClamAV engine is activated in Immunet, it can also occupy up to a GB of memory. There are actually only inflated products for end users. Avira did a lot of damage to me in the days of XP due to poor detection (virus detected but not blocked). I don't touch that anymore. Avast installs Chrome without asking but at first Window you can disable this. ... I had AVG until it no longer supported Windows XP, I was quite happy with it and then switched to Immunet. All well-known free versions that I have tested so far work in the same way, a lot of self-promotion and nothing works without registration. I can only recommend testing different versions yourself. I cannot recommend an alternative to you at the moment. I'm currently testing Panda Free, I don't know yet. I am not yet comfortable with it, but the memory requirement has been rather low until now. I'll try Sophos and Kaspersky next days. With a purchase version I would probably choose TrendMicro (not so well known in Europe) but ist also verry inflated. But I would like to have a working immunet. I haven't had any problems with infections since Immunet. https://uk.pcmag.com/antivirus/120817/the-best-free-antivirus-protection
  23. The update problem and the outdated ClamAV is not the only thing that worries me. Does the cloud work or not, I can't check it? (0 people protected, 0 threads) I don't get pop-up information about unsuccessful or successful updates. No popup information about program updates. No popup information when a virus is found. When I scan a folder / file in the context menu in Explorer, nothing happens. I honestly don't feel like testing with Eicar anymore whether a scan is carried out or not. If Cisco is no longer interested in further developing or at least maintaining Immunet, then it would be better and safer for users and the Internet if they close https://www.immunet.com. Whatever the reasons, Cisco knows them and should also inform their "non-paying" customers about this offer. It's done for me, I'm testing others. At the moment... EOL Frank
  24. Sorry, no! Not for me. Uninstall, restart, install, update... always the same, immunet (ClamAV) cant update the databases and ClamAV is outdatet.
  25. As far as I can understand now, freshclam.exe has connection problems or a bug when downloading. At first I had the problem that the download worked but the downloaded file could not be imported. This problem does not occur with the new version. I also tried to instruct the updater in "freshclam.conf" to use uncompressed DB files. But unfortunately this entry is ignored by Immunet. It would be nice if the configuration file could be used fully, then it would be possible to create notifications with OnUpdateExecute, OnOutdatedExecute and OnErrorExecute. CompressLocalDatabase BOOL By default freshclam will keep the local databases (.cld) uncompressed to make their handling faster. With this option you can enable the compression; the change will take effect with the next database update. Default: no Source: https://www.systutorials.com/docs/linux/man/5-freshclam.conf/ Slowly I am becoming more and more convinced that ClamAV is a nice and very useful tool, but its development at Immunet has been very limited I doubt that I'm really well protected with Immunet right now. I am seriously considering switching to something else that is too bloated for me.
  • Create New...